| Our Products |
|
 |
|
|
|
| CAPACITOR BANK WITH & WITHOUT HARMONIC FILTER |
|
|
| GENERAL FEATURES |
| Separation up to Form 4, Type 1 to 7 |
- Standard ratings from 17.5 t 537.5kVAr
- Standard sizes according to capacitor ratings
- Standalone unit connected by cables or Connected to extended main bus bars
- Capacitors fitted with protection caps
- Temperature controlled by fan
- Special fixing brackets for the capacitorResulting in increased air circulation
|
 |
|
|
| Protection class IP 41 to IP 54 |
| TECHNICAL DATA |
| INCOMER |
MCCB 40A to 1250A, 3-pole, 30 to 85kA Load Break Switch 40A to 1250A, 3-pole |
| OUTGOINGS |
HRC - Fuses, 100kA |
| BUS BARS |
H.C.H.D. copper, electrolytically tinned rated for 50kA short circuit |
| CONTRACTORS |
Rated for the size of the capacitors, special contactors for power factor correction capacitors equipped with limiting resistance for the inrush current. |
| CAPACITORS |
Dry type of the MKP technology, mounted in upright position designed for permanent over voltage of 450V |
| REGULATOR |
Microprocessor based with switching program 1:2:4 to allow compensation of low loads. Built-in automatic rotation of capacitor sequence |
| ENCLOSURE |
Electro galvanized sheet steel, polyester powder coated to RAL 7032 |
| CABLING |
Top or Bottom |
| TEMPERATURE |
50oC |
|
|
| |
|
